ISW Horizontal Pipe Inline Water Booster Pump Red Color 10~125 m Head

ISW Horizontal Pipe Inline Water Booster Pump Red Color 10~125 m Head

Description

ISW Horizontal Pipe Centrifugal Pump is designed with the domestic advanced hydraulic model. At the same time according to the use of temperature, medium and other different in the ISW-based derived from the hot water pump, high-temperature pumps, chemical pumps, pumps, etc., is the current national standard stereotypes to promote products.

ISW Horizontal Pipe Centrifugal Pump Model Meaning:

ISW80-60 (I) (A) (B) (C)
ISW: Horizontal clean water pump
80: pump inlet and outlet nominal diameter (mm)
60: impeller nominal diameter (mm)
(I): traffic classification
(A): Impeller first cut
(B): Impeller second cut
(C): Impeller third cut

ISW Horizontal Pipe Centrifugal Pump Working Conditions:

1. suction pressure ≤ 1.0Mpa, or pump system maximum working pressure ≤ 1.6Mpa, that is, pump inlet pressure + pump head ≤ 1.6Mpa, pump static pressure test pressure of 2.5Mpa, please specify the system when the work pressure. Pump system working pressure greater than 1.6Mpa should be made when ordering. So that the pump flow member and the connecting portion are made of cast steel during manufacture.
2. ambient temperature <40 ℃, relative humidity <95%.
3. the transport medium in the solid particle volume content does not exceed 0.1% of the unit volume, particle size <0.2mm.

Note: If the use of media with a small particle, please specify when ordering, in order to use the wear-resistant mechanical seal.

hot water booster pump

fire-fighting booster pump

ISW Horizontal Pipe Inline Water Booster Pump Red Color 10~125 m Head Images